| I would suggest you get extra solution ready because you may run out. Make sure the work area is clean, The underside piece that has the 4 screw holes does not match up with the laptop screw locations. 2 of 4 matched. That is my only complain. I had to carefully use a exacto knife to cut the bodyguardz out from the screw holes. It was a pain to cut it but it only goes to show how strong is the material. The bodyguardz is colorless. So there is no off-yellow coloring at all. Overall, the application process was easy. I wish there is one piece made for the screen. Not sure why there isn't one available. When you apply the underside pieces, the corners didn't not adhere right away due to the wetness from the solution and the edges of the underside are curved. After a few minutes, as it dried up a bit, you want to push the bodyguardz on those 4 corners to make them adhere. So don't be alarm if the material didn't adhere initially. But I would not wait too long before press firmly. |