The Crown - Installation Instructions | BodyGuardz®

installing pure Crown


    - PRO TIP 1 -
    Before you begin installation, make sure the device screen is completely dust-free. Dust, hair and other small particles can cause a permanent bubble under the protector. Use the included microfiber cleaning cloth and dust removal strips to remove any dust before installation.

    - PRO TIP 2 -
    If you do get a piece of dust underneath the protector, carefully use your fingernail to lift the closest edge and use the dust removal strip on the sticky side of the protector to grab and remove the dust.


BodyGuardz Pure + Crown
iPhone 6/6s and 6/6s Plus install

Hello my name is Nick. I’m going to teach you how to install the BodyGuardz Pure and The Crown on your iPhone 6 and 6 Plus. When opening up the box there are a few things you will find inside. First you will find the BodyGuardz Pure sitting inside the Express Align tray.

Next you will find “The Crown” - this sits around your BodyGuardz Pure protecting the edges of your screen.

You will also find:

• Express Align installation instructions
• Advantage program registration info
• Dust removal stickers
• Cleaning cloth
• BodyGuardz sticker

Next you will want to wipe all the dust from your screen (make sure there are no dust particles remaining on your screen). Now peel back the liner with the number one on it (this exposes the adhesive side of the protector) then turn the Express Align tray over and place the tray on your iPhone 6 or 6 plus. Make sure your home button aligns with the Pure’s home button cut out. Peel back the tab with the number three on it and push on the Pure so it adheres to your device.

You can then lift the tray off your device. You can use the cleaning cloth to help you push out any remaining bubbles. Bubbles may also take 24 to 48 hours to disappear. If you do have any dust particles left under the screen, you can use the dust removal strips to help you remove the particles.

Now that you have installed your BodyGuardz Pure, take the Crown and peel back the liner exposing the Crown's adhesive. Align the edges of the Crown to the edges of the BodyGuardz Pure. Make sure the Crown is facing the right direction. Congratulations on your successful install. Your phone is looking better than ever and now has edge to edge screen protection.