Suction Cup Method
Thank you for purchasing SpyGlass by BodyGuardz for your
smartphone! After you complete the installation process detailed in this video, you will enjoy
unmatched protection from impacts, scratches, and prying eyes.
Included in the box are a cleaning cloth, dust removal stickers, a suction cup, and the SpyGlass
tempered glass screen protector. Make sure you have these on hand before you begin.
Let’s get started. First, turn off your device, remove your case, and place your device on a clean,
To prevent dirt or dust from getting trapped beneath the protector, clean your device’s screen with the
cleaning cloth provided.
Once you have removed all dirt and dust from your device, attach the suction cup to the front of the
protector, which is covered with a clear cap sheet that has tabs on both the top and bottom.
Next peel off the release liner to expose the adhesive. Holding on to the suction cup and edges of the
protector, align the protector over your device. We recommend using the speaker and home button as a
guide to ensure perfect alignment.
When you have aligned the protector, lay it down gently on your device. While pressing down on the
center of the screen, carefully remove the suction cup.
Use the dust removal stickers if any dust particles become trapped between the protector and your
device during the installation. Carefully lift up the corner of the protector closest to the particle,
then place the sticky side of the strip against the speck of dust and pull the dust sticker straight
Use the included cleaning cloth to push out any air bubbles. Some air bubbles may take 24-48 hours to
disappear, but you should be able to push most of them out. Finally, peel off the cap sheet from the
surface of the protector.
Congratulations on installing SpyGlass by BodyGuardz! If you have any questions, please email us at firstname.lastname@example.org, or send us a message on Facebook.